Loading

Product Name:手机摄像头

Material[材料]:金属粉末MIM

Part Weight[克重]:6.5g

Cavity Qty[模穴]:2

System Type[系统类型]:开放式热流道系统


Description 说明:

     占瑞针对小产品研发的一嘴多头结构系统(每个点位位置可以不一样)。

      产品为一模两穴,流道采用流变平衡技术,确保各热嘴压力降保持一致,适用于小产品及产品排位紧密的模具。

【此套系统产品两点最小间距为15MM,最大间距为18MM】,大幅降低加工成本,模具成本!

ANRY develops a multi head structure HRS for small products (each point position can be different). 

This product is one mold with two cavitives, and the runner adopts rheological balancing technique , which ensures that the pressure drop of each nozzle keeps the same, and it is suitable for the small products or compact mould products. 

【The minimum distance between two points of this system product is 15mm, and the maximum distance is 18mm. 】

It is greatly reducing the processing cost and mold cost! 


图片关键词

热嘴发热丝缠绕在本体上,每个点位都是单独控温,温度控制精准 !

The nozzle heating wire is wound on the nozzle body, each point temperature is individually controlled, and the temperature control is accurate!


法律声明:

本网站登载的文章、照片、声音、录像、图画、图表及其他信息内容,

除部分内容系与明确注明之者或信息提供者与网页相关的资料提供者共同享有著作权或共同享有明示活默示的使用授权外,

其全部著作权均依法归属于本网站及本公司,

禁止任何单位或个人未经书面授权进行复制、变造、剽窃、抄袭、转载、翻译、分发或非法使用。